Circle T MFG
M312 Drawer Notcher
-
This upgraded model includes EASY Foot Cycle Switch!!!
-
HIGH WEAR Phenolic Top!!!
-
Under mount notched and locating hole drilled simultaneously!
-
EASY drawer locating regardless of box width using center stop!
-
LOW MAINTENANCE machine for a GREAT VALUE!
APPLICATION SPECIFICATIONS:
-
Notch Dimension: 35mm W x 1/2″ H
-
Locating Hole Diameter: 6mm
-
Operating Performance: Over 200 boxes per hour
DRIVE PACKAGE SPECIFICATIONS:
-
Main Motor: 1.5 HP
-
Pneumatic Drill Included
-
Insert Cutterhead
-
Available in 120V and 220V Single Phase, 230V and 460V 3phase, Hydraulic, and Pneumatic Drive Package as well
UTILITY REQUIREMENTS
-
Dust Collection Requirements: 670 CFM, 4″ Outlet
-
Pneumatic Requirements: 90-100 PSI to power drill and control system
DIMENSION SPECIFICATIONS:
-
Table Size: 22″ x 48″
-
Table Height: 36″
-
Footprint: 52″ W x 42″ D X 42″ H
SHIPPING WEIGHT: 625bs
NET WEIGHT: 460lbs
C220 Coping Machine
APPLICATION SPECIFICATIONS:
-
EASY Quick-Change Spindles INCLUDED
-
EASY Foot Pedal Cycle Start
-
EASY Pneumatic Hold Down Clamp System
-
16” Wide Cutting Capacity
-
5/8” to 1” Material Thickness
DRIVE PACKAGE SPECIFICATIONS:
-
Main Motors: 2 – 5 H.P.
-
1.25” Spindles
-
3” and 4” (ID) Cutter Compatible
-
Available in 220v 3ph, 460v 3ph, and Hydraulic Drive Packages (some electric needed for readouts)
-
Flat Belt Drive
-
Y and Z Axis Spindle Adjustments with DRO
UTILITY REQUIREMENTS
-
Dust Collection Requirements: 2 – 4″ Outlets, 670 CFM (each)
-
Pneumatic Requirements: .3 CFM @ 100 PSI to Power Table and Clamp
-
4 Amp FLA @ 460v 3ph (Motor FLA, not disconnect size)
-
8 Amp FLA @ 230v 3ph (Motor FLA, not disconnect size)
DIMENSION SPECIFICATIONS:
-
Table Size: 53” L x 16” W
-
Table Height: 36”
-
Footprint: 53” L x 34” D x 60” H (Additional 17” needed on left side for table movement)
-
Working Area Footprint: 70” L x 34” W x 60” H
SHIPPING WEIGHT: 1900lbs
SHIPPING DIMENSIONS:
61”L x 42”W x 69”H
LM116 Lock Mitre
-
Our Model LM116 is Uniquely Designed to Produce an extremely PRECISE and EASY LOCK MITER JOINT. Many customers use our machines for face-frame cabinetry, beams, pillar/column wrapping, box newel posts, solid surface, and more!
-
A and B profiles are cut using a Single Pneumatic Powered Tilting Spindle!!!
-
No more downtime setting up and changing out your shaper!!!
-
No more running pieces on their side!!!
-
Upgrade to our EASY LOCK MITER LM116
APPLICATION SPECIFICATIONS:
-
Maximum Material Thickness: 1″
-
Minimum Material Thickness: 1/2″
-
Minimum Material Width: 1-1/4″
-
Minimum Material Width (2-Sided): 2″
-
Minimum Material Length: 12″
-
Capable of Machining Angles from 90 – 30 Degrees (Finish Angle)
DRIVE PACKAGE SPECIFICATIONS:
-
Spindle Motor: 5 HP
-
Feed Motor: 0.5 HP
-
Spindle Diameter: 1-1/4″
-
Spindle Speed: 8,200 RPM
-
Variable Speed 11-Roll Positive Grip Feeder
UTILITY REQUIREMENTS
-
Dust Collection Requirements: 670 CFM, 4″ Outlet
-
Pneumatic Requirements: 100 PSI .5 CFM
-
25 AMP Disconnect at 480V 3phase
DIMENSION SPECIFICATIONS:
-
Table Size: 40″ x 47″
-
Footprint: 42″L x 54″W x 60″H
-
Shipping Dimensions 57″L x 48″W x 79″H